BIFEN IT 1 Gallon Bifenthrin 7.9% – Generic Talstar P – Not For Sale To: NY, CT

Not For Sale To
:
New York , Connecticut
( due to pesticide regulations )
Control Solutions Bifen IT  – 1 Gal Jug ( 128 oz. )
Generic Talstar P
Bifenthrin 7.9%
This
Listing is for 1 / 128 oz Jug of Bifen Insecticide / Termiticide
Concentrate Makes Up To 256 Gallons Depending on the Application Needs
Bifen
IT insecticide is comparable to the very popular Talstar One, but much
less expensive. Bifen IT contains 7.9% bifenthrin, has a long 3 months
residual, and kills over 75 insect pests including termites. Bifen IT
and the other bifenthrin products can be used both indoors and outdoors,
in lawn and garden areas, and even in food-handling areas. 1 Qt. of
Bifenthrin insecticide yields 32-96 gallons. If you are looking for a
low cost alternative to Talstar One, then look no further. Bifen I/T is
tough on pests, but not on your wallet.
Active Ingredient:
Bifenthrin 7.9%
Labeled
for  over 75 different pests — everything from spiders, mosquitoes,
cockroaches, ticks and fleas to pillbugs, chinch bugs, earwigs,
millipedes and termites.
Use  Inside, outside, around the perimeter, ornamental, and food handling areas.
***Can Not Be Shipped To:
NY, CT
Mfg – Control Solutions
Bifen IT and the very popular Talstar One Multi-Insecticide have the exact same label and the same amount of active ingredient.
Active Ingredient: Bifenthrin – 7.9% synthetic pyrethroid.
DESCRIPTION:
Talstar
One, Bifen I/T and other Bifenthrin generics control over 75 common
insect pests, including termites. Bifen can be used as an indoor and
outdoor pest control, turf and ornamental application, and for treating
pests in food-handling areas. Both Talstar One and Bifen I/T are
microencapsulated products that do not break down easily with rain once
they bond to surfaces. Both Talstar One and Bifen IT are clear
substances that leave no stains on painted surfaces.
Bifen IT
can last up to 6 months outside. It is very effective on Japanese
Beetles, clover mites ants, termites, fleas, ticks, spiders, scorpions,
roaches, millipedes, earwigs, army worms, mealybugs, mites,
grasshoppers, pillbugs, cutworms, sod webworms, weevils, leaf miners,
box elder bugs, bees, wasps, sowbugs, crickets, and turf and ornamental
pests.
Best applied with a compressed air sprayer.
Apply to outside foundation and all entry points such as around windows, doors, etc. Always read the label before use.
Listed below are some of the use sites that are allowed:
-aircraft (do not use in aircraft cabins) -hotels
-apartment -industrial buildings
-buildings -laboratories
-bakeries -meat/poultry/egg processing plants
-bottling facilities -mobile/motor homes
-breweries -nursing homes
-buses -offices
-cafeterias -railcars
-candy plants -restaurants
-canneries -schools
-dairy product processing plants -ships
-food manufacturing plants -trailers
-food processing plants -trucks
-food service establishments -vessels
-granaries -warehouses
-grain mills -wineries
-hospitals
Bifen I/T
may
be used to control ants, bees, beetles, boxelder bugs, carpet beetles,
centipedes, clothes moths, cockroaches, crickets, earwigs, firebrats,
flies, gnats, midges, millipedes, pillbugs, scorpions, silverfish,
sowbugs, spiders, ticks, and wasps.
In structures and buildings and
on modes of transportation, use a 0.02% to 0.06% suspension (0.33 to 1
fl. oz. per gallon of water) using a crack and crevice, pinstream, spot,
coarse, low-pressure spray (25 p.s.i. or less) or with a paint brush.
Indoor
Treatments: Apply where pests hide. These areas include, but are not
limited to, baseboards, corners, storage areas, closets, around water
pipes, doors and windows, attics and eaves, behind and under
refrigerators, cabinets, sinks, furnaces, stoves, the underside of
shelves, and drawers. Treat with a low pressure, coarse, crack and
crevice or spot spray. Pay close attention to cracks and crevices. Not
for use as a space spray.
Mixing Directions:
See mixing directions in “Pest Control on Outside Surfaces and Around Buildings” section.
To make a dilution for brush or spray treatments:
Dilute Bifen I/T with water.
-Fill sprayer with the required amount of water.
-Add Bifen I/T.
-To ensure proper mixing, close sprayer and shake before use.
-Only mix the amount of solution that is necessary for treatment.
In order to achieve and/or maintain control in times of high pest pressure, retreatment may be needed.
Repeat
application should only take place if there are signs of renewed insect
activity and must not exceed one application per 7 days.
Ants:
Apply to any ant trails, around doors and windows and other places that ants frequent.
Bees
and Wasps: Apply to nests in late evening when these pests are at rest.
Spray nests, entrances to nests and surrounding areas thoroughly.
Contact as many insects as possible. Retreat if signs of renewed
activity exist.
Boxelder Bugs, Centipedes, Earwigs, Beetles,
Millipedes, Pillbugs, and Sowbugs: Treat near doors and windows, storage
areas, baseboards and other sites where these pests may be found.
Cockroaches, Crickets, Firebrats, Scorpions, Silverfish, Spiders, and Ticks:
Use
a coarse low- pressure, crack and crevice or spot spray, paying close
attention to cracks and crevices. Treat where pests hide. These areas
include, but are not limited to, attics and eaves, baseboards, closets,
corners, storage areas, around water pipes, doors and windows, behind
and under cabinets, furnaces, refrigerators, sinks, stoves, and the
underside of shelves and drawers.
For More Information About Bifen and It’s Many Uses –  Please Read the Label: Control Solutions, Inc
Standard Application Dilution rates / Mixing Ratios – Bifen IT
0.33 oz./gallon of water – 0.02% – prevention, low level infestions
0.5 oz./gallon of water – 0.031% – general indoor or outdoor use
1.0 oz./gallon of water – 0.06% – severe infestations, less frequent treatments, longer residual, quicker knockdown
1 gallon of finished solution should cover 1,000 square feet when using a hand pump sprayer
No oral advice or written information given by American Pest supplies shall create a warranty.
American
Pest Supplies is a seller of various products. American Pest Supplies
does not warranty the safety or the effectiveness of any of the products
listed on this website. Any warranty or guarantee of safety or purpose
for any particular use lies solely with the manufacturer.
Pest
Control Products always have a label attached and it is here by noted
that for all purposes the label is the law and according to federal law
the product label must be followed and that any pesticide product must
be used according to the label directions.
Any advice or
recommendations given by American Pest supplies or anyone representing
American Pest Supplies will never be intended to take the place of the
pesticide label.The pesticide label is the law and a legal document. 
Always read and follow the label directions before using any pesticide
product.
Some of the products sold by American Pest Supplies
could require special licensing training or registration of the user in
that users State, County, City, Etc. It is the sole responsibility of
the purchaser and/or the end user to provide a license, permit,
registration etc. If required by that purchasers local or state
authorities.It is the sole responsibility of the user to verify that any
products purchased are licensed for use in their State, County or City.